AHSC12-10

Overview

Anycubic Red Gold Silk Filament for Premium Prints
Create stunning visual effects without complex hardware using the Anycubic PLA Silk Dual Filament in a striking Red and Gold combination. Designed specifically for makers who want their creations to stand out, this 1 kg spool delivers a sophisticated gradient effect that shimmers as you rotate your model. It is perfect for decorative items, figurines, fan art, and display pieces where aesthetics are paramount. The product code AHSC12-10 identifies this premium material which works seamlessly with any standard FDM printer accepting 1.75 mm filament.

Description

This dual-colour silk PLA allows you to control the surface finish by simply adjusting your printer settings. By increasing nozzle temperature or reducing print speed, you can achieve a higher gloss level for a glass-like appearance. The filament has undergone rigorous bending and tearing tests to ensure flexibility that prevents jams during long prints. It supports intelligent identification on compatible Anycubic ACE Pro systems and comes in a reusable spool for convenience.

Features

Key Printing Capabilities
The material is engineered for reliability and ease of use across a wide range of settings. You can print at speeds ranging from 50 to 250 mm/s with a nozzle temperature between 210 and 240 degrees Celsius. A heated bed set to 55-56 degrees Celsius ensures proper adhesion. For optimal results, it is recommended to dry the filament at 55-65 degrees Celsius for 6 to 8 hours before use.

• Dual-colour red and gold silk PLA in a single spool with no extra mixing hardware needed
• Silk-like lustrous finish producing shifting gradients from every viewing angle
• Controllable gloss level adjustable via nozzle temperature or print speed changes
• Proven flexibility tested through thousands of bending cycles for smooth feeding
• Compatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle
• Supports intelligent identification when paired with Anycubic ACE Pro systems

Tech Specs and Material Data
For those requiring precise technical data for advanced projects, this filament meets strict industry certifications including RoHS, REACH, and SDS. The material has a density of 1.22 g/cm and a melting point of 164 degrees Celsius. It offers strong mechanical properties with a tensile strength of 37±4 MPa and an elongation at break of 28±5%, ensuring durability in the final print.

• Dry Out Before Use: Recommended
• Drying Condition: 55-65C for 6-8 hours
• Nozzle Size: Recommended 0.4 mm or above
• Printing Temperature: 210-240 C
• Heated Bed Temperature: 55-56 C
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm /s
• Melt Index: 9±1 g/10 min at 190C with 2.16kg load
• Vicat Softening Temperature: 54 C
• Heat Deflection Temperature: 53 C at 0.45MPa
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments for decorative parts and artworks

What's in the Box
The package includes one spool of Anycubic PLA Silk Dual Filament in the Red/Gold colorway. This single item is ready to load into your printer for immediate use.

• Anycubic PLA Silk Dual Filament - Red/Gold x1

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	AHSC12-10
Colour	Red Gold (#D22630,#FFC600)
Dry Out Before Use	Recommended
Drying Condition	55-65degreesC, 6-8h
ACE Compatibility	Compatible
Nozzle Size	Recommended 0.4 mm or above
Printing Temperature	210-240 degreesC
Heated Bed Temperature	55-56 degreesC
Recommended Printing Speed	50-250 mm/s
Maximum Volume Speed (Flow Rate)	8 mm³/s
Density	1.22 g/cm³
Melt Index	9±1 g/10 min (190degreesC/2.16kg)
Melting Point Temperature	164 degreesC
Vicat Softening Temperature	54 degreesC
Heat Deflection Temperature (0.45MPa)	53 degreesC
Young's Modulus	2000±200 MPa
Tensile Strength	37±4 MPa
Elongation at Break	28±5%
Bending Modulus	2400±160 MPa
Bending Strength	66±4 MPa
lzod lmpact Strength (X-Y)	20±2 kJ/m²
Tensile Strength (Z)	12±4 MPa
Filament Type	Aesthetic filaments
Recommend to Print	Decorative parts, fandom, artworks
Intelligent Identification	Supported
Reusable Filament Spool	Supported
Size	1KG

FAQ

Does this filament require a dual extruder setup?
No, the Anycubic PLA Silk Dual Filament features a built-in red and gold design in a single 1 kg spool, so you can achieve gradient visual effects without needing any colour-mixing hardware.

How do I control the gloss level of my prints?
You can adjust the surface finish by modifying your printer settings; increasing the nozzle temperature or reducing the print speed will increase filament fluidity for a higher-gloss result.

What are the recommended printing temperatures and speeds?
For best results, set your nozzle between 210-240 degrees C with a heated bed at 55-56 degrees C, while maintaining a printing speed of 50-250 mm/s.

Is it necessary to dry the filament before use?
Yes, drying is recommended for this aesthetic filament; you should dry it at 55-65 degrees C for 6-8 hours prior to printing to ensure optimal performance.

Which printers are compatible with this material?
This 1.75 mm filament works with all FDM printers that accept standard filament, provided the printer uses a nozzle of 0.4 mm or larger; it also supports intelligent identification on compatible Anycubic ACE Pro systems.