AHSC14-10

Overview

Elevate your 3D printing projects with the Anycubic PLA Silk Tri-colour Filament in Blue, Green, and Purple. This premium 1kg spool, identified by part number AHSC14-10, is engineered for creators who demand more than standard monochrome prints. By seamlessly blending three vibrant hues into a single strand, this filament delivers stunning natural gradient transitions and a sophisticated silk-like luster that changes with the viewing angle. Whether you are crafting decorative parts, fan art, or unique artworks, this material provides the reliability and aesthetic appeal needed to bring your designs to life.

The beauty of this filament lies in its versatility. By fine-tuning your printer settings within the recommended temperature range of 210-240 degrees Celsius and speeds between 50-250 mm/s, you can control the final surface sheen from a subtle satin to a high-gloss finish. Extensive bending and tearing tests confirm its flexibility, ensuring smooth, uninterrupted runs even on complex models. It is fully compatible with any FDM printer utilizing 1.75mm filament and a nozzle of 0.4mm or larger.

Description

This Anycubic PLA Silk Tri-colour Filament offers a unique blend of aesthetics and performance for the discerning maker. The product features a dynamic tri-colour gradient combining deep blue, lush green, and rich purple to create eye-catching visual effects on every layer. Its adjustable gloss finish allows users to customize the surface shine by modifying print temperatures and speeds. Designed for reliability, the filament has passed rigorous flexibility tests to prevent jams and ensure consistent extrusion.

Features

Key Features

• Tri-colour gradient (blue, green, purple) produces rich, layered colour transitions across the printed surface
• Silk-like luster shifts with viewing angle, giving finished models a premium, eye-catching finish
• Controllable gloss - raise nozzle temperature or lower print speed to increase surface smoothness and shine
• Printing temperature range of 210-240 degrees C and recommended speed of 50-250 mm/s suits a wide range of FDM printers
• Compatible with any 1.75mm filament printer fitted with a 0.4mm or larger nozzle
• Proven flexibility through extensive bending and tearing tests for reliable, uninterrupted printing
• Complies with RoHS, REACH, and SDS certifications

Technical Specifications

• Colour: Blue Green Purple (#003594,#006F44,#452B6F)
• Dry Out Before Use: Recommended
• Drying Condition: 55-65 degrees C, 6-8h
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.4mm or above
• Printing Temperature: 210-240 degrees C
• Heated Bed Temperature: 55-56 degrees C
• Recommended Printing Speed: 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm cubed/s
• Density: 1.22 g/cm cubed
• Melt Index: 9±1 g/10 min (190 degrees C/2.16kg)
• Melting Point Temperature: 164 degrees C
• Vicat Softening Temperature: 54 degrees C
• Heat Deflection Temperature (0.45MPa): 53 degrees C
• Young's Modulus: 2000±200 MPa
• Tensile Strength: 37±4 MPa
• Elongation at Break: 28±5%
• Bending Modulus: 2400±160 MPa
• Bending Strength: 66±4 MPa
• Izod Impact Strength (X-Y): 20±2 kJ/m squared
• Tensile Strength (Z): 12±4 MPa
• Filament Type: Aesthetic filaments
• Recommend to Print: Decorative parts, fandom, artworks
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Silk Tri-colour Filament 1kg - Blue/Green/Purple x1

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	AHSC14-10
Colour	Blue Green Purple (#003594,#006F44,#452B6F)
Dry Out Before Use	Recommended
Drying Condition	55-65degreesC, 6-8h
ACE Compatibility	Compatible
Nozzle Size	Recommended 0.4 mm or above
Printing Temperature	210-240 degreesC
Heated Bed Temperature	55-56 degreesC
Recommended Printing Speed	50-250 mm/s
Maximum Volume Speed (Flow Rate)	8 mm³/s
Density	1.22 g/cm³
Melt Index	9±1 g/10 min (190degreesC/2.16kg)
Melting Point Temperature	164 degreesC
Vicat Softening Temperature	54 degreesC
Heat Deflection Temperature (0.45MPa)	53 degreesC
Young's Modulus	2000±200 MPa
Tensile Strength	37±4 MPa
Elongation at Break	28±5%
Bending Modulus	2400±160 MPa
Bending Strength	66±4 MPa
lzod lmpact Strength (X-Y)	20±2 kJ/m²
Tensile Strength (Z)	12±4 MPa
Filament Type	Aesthetic filaments
Recommend to Print	Decorative parts, fandom, artworks
Intelligent Identification	Supported
Reusable Filament Spool	Supported
Size	1KG

FAQ

What colours does this filament produce?
The Anycubic PLA Silk Tri-colour Filament features a gradient blend of blue, green, and purple that creates rich, layered colour transitions across your prints.

How can I control the finish or gloss level?
You have direct control over the surface sheen; raising the nozzle temperature to 240 degrees C or lowering print speed will increase the smoothness and shine for a high-gloss look, while other settings yield a subtle satin finish.

Is this filament compatible with my printer?
This 1.75 mm filament works with any FDM printer using a 0.4 mm or larger nozzle, and it is also fully compatible with Anycubic ACE systems for intelligent identification.

Does the filament require pre-drying before printing?
Drying out before use is recommended to ensure optimal performance; store at 55-65 degrees C for 6-8 hours if the spool has been exposed to moisture.

What types of projects are best suited for this material?
This aesthetic filament is ideal for decorative parts, fan art, and artwork where a premium, eye-catching silk-like luster is desired, though users should note it is not designed for high-temperature applications above 54 degreesC.