SSX2CL-10

Overview

The Anycubic Water Wash Resin 2.0 Clear is a premium light-curing material designed specifically for MSLA and LCD resin printers operating within the 365 to 405 nm wavelength range. This hydrophilic group-modified formulation allows users to rinse printed parts clean using only plain water, eliminating the need for harsh solvents like isopropyl alcohol during the washing stage. Once cleaned, a brief post-cure cycle at 405 nm ensures the part achieves optimal mechanical properties, resulting in firm, dimensionally stable, and transparent clear prints ideal for display models or detailed miniatures.

Description

This product offers a streamlined workflow for high-quality 3D printing without compromising on detail. The water-washable formula significantly reduces cleanup time and exposure to strong chemicals, making it safer and more convenient for home and studio environments. With a low volume shrinkage rate of just 2.2 to 5.5 percent, parts maintain excellent dimensional accuracy after curing. The resin delivers robust mechanical performance with a tensile strength between 38 and 43 MPa and a hardness rating of 82 to 85 HD, ensuring that finished models are durable enough for handling while retaining a crystal-clear finish.

Designed for ease of use, the Anycubic Water Wash Resin 2.0 Clear requires minimal preparation before printing. Simply shake the container well to ensure consistency within the hydrophilic resin mixture. For best results, maintain an ambient temperature between 20 and 40 degrees Celsius during the print process to guarantee consistent layer adhesion. The part number SSX2CL-10 identifies this specific clear formulation suitable for a wide array of consumer-grade resin printers.

Beyond printing, post-processing is straightforward. A post-cure duration of approximately three minutes at 405 nm with an intensity of 25,000 to 30,000 µW/cm² locks in the material's properties. After curing, the resin can be disposed of as standard plastic waste once fully solidified. Users should follow proper environmental guidelines by allowing wastewater to cure under sunlight before disposal to prevent groundwater contamination.

Features

Key Features

• Water-washable formula allows rinsing printed parts with water for at least 5 minutes without needing IPA
• Compatible with a wide range of MSLA and LCD resin printers using 365-405 nm UV light sources
• Delivers high transparency suitable for display models, miniatures, and detail-focused prints
• Cured hardness reaches 82-85 HD with tensile strength ranging from 38 to 43 MPa
• Low volume shrinkage rate of 2.2-5.5% ensures dimensionally accurate output
• Rapid post-cure cycle completes in just 3 minutes at 405 nm UV light
• Post-cured resin can be safely treated and disposed of as standard plastic waste

Technical Specifications

• Colour: Clear
• Resin Size: 1kg
• Material Composition: Hydrophilic group-modified light-curing resin
• Wavelength Compatibility: 365-405 nm
• Viscosity: 190-230 mPa·s at 25 degrees Celsius
• Density: 1.07-1.09 g/cm
• Hardness: 82-85 HD
• Tensile Strength: 38-43 MPa
• Elongation at Break: 16-22%
• Bending Modulus: 48-60 MPa
• Bending Strength: 2300-3000 MPa
• Young's Modulus: 1100-1300 MPa
• Izod Impact Strength: 133 J/m
• Volume Shrinkage Rate: 2.2-5.5%

The printing process involves specific exposure settings to ensure optimal layer bonding. The first layer exposure duration should be set between 25 and 40 seconds, while normal exposure durations typically range from 2 to 2.5 seconds depending on the printer model. The resin performs best within a print temperature environment of 20 to 50 degrees Celsius. For post-processing, the curing temperature should ideally remain between 18 and 30 degrees Celsius during the UV exposure phase.

Proper disposal is essential for environmental safety. Users must not drain wastewater directly into sewers to avoid contaminating groundwater. Instead, after cleaning, let the wastewater sit in a tank for a period of time before placing it under sunlight to allow any remaining resin to fully cure. Once the waste has solidified completely, it can be disposed of as solid plastic waste for recycling.

What's in the Box

• Anycubic Water Wash Resin 2.0 - Clear x1 bottle (1kg)

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	SSX2CL-10
Colour	Clear
Resin Size	1kg
Pre-print preparation	Shake well before use
Print environment	20-40 degreesC
First layer exposure duration	25-40 s
Normal exposure duration	2-2.5 s
Print temperature	20-50 degreesC
Material	Hydrophilic group-modified light-curing resin
Wavelength	365-405 nm
Viscosity	190-230/mPa s(25degreesC)
Density	1.07-1.09/g/cm³
Hardness	82-85 HD
Tensile Strength	38-43 MPa
Elongation at Break	16-22%
Bending Modulus	48-60 MPa
Bending Strength	2300-3000 MPa
Young's Modulus	1100-1300 MPa
Izod Impact Strength	133 J/m
Volume Shrinkage Rate	2.2-5.5%
Cleaning	95% IPA
Washing duration	≥3 mins
UV Wavelength	405 nm
Curing Temperature	18-30 degreesC
UV Intensity	25000-30000 uW/c²
Curing time	3 mins
Disposal	Post-UV-curing resin is treated as plastic waste
Cleaning	Water
Washing duration	Medium ≥5 min
UV Wavelength	405 nm
Curing Temperature	18-30 degreesC
UV Intensity	25000-30000 uW/c²
Curing time	3 mins
Disposal	1. Do not drain wastewater into sewers to avoid contaminating groundwater.
	2. After cleaning, let the wastewater sit in the tank for a period of time.
	3. Place it under sunlight to allow the resin in the tank to fully cure.
	4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.

FAQ

What kind of cleaning process is required after printing?
The resin features a water-washable formula, allowing you to rinse printed parts with plain water for at least 5 minutes without needing harsh solvents like isopropyl alcohol.

Which 3D printers are compatible with this material?
Anycubic Water Wash Resin 2.0 works with MSLA and LCD resin printers that utilize UV light sources within the 365-405 nm wavelength range.

How should I prepare the resin before starting a print job?
You must shake the bottle well before use to ensure consistent results, and maintain an ambient printing temperature between 20-40 degrees C for optimal layer adhesion.

What are the mechanical properties of the cured prints?
Once post-cured for 3 minutes at 405 nm, the resin achieves a hardness of 82-85 HD and tensile strength of 38-43 MPa, resulting in firm and dimensionally stable parts.

How should I dispose of the used resin or wastewater?
Never drain wastewater into sewers; instead, let it sit to cure fully under sunlight before disposing of the solidified material as standard plastic waste for recycling.