SSX2TG-10

Overview

Anycubic Water Wash Resin 2.0 Translucent Green Product Overview

The ANYCUBIC Water Wash Resin 2.0 in Translucent Green is engineered for MSLA and LCD resin printers, offering a seamless bridge between high-detail printing and eco-friendly cleaning. This hydrophilic group-modified formulation allows users to rinse printed parts clean using only plain water, eliminating the need for harsh solvents like isopropyl alcohol during the washing phase. Designed for ambient temperatures between 20-40degrees C, the resin ensures consistent layer adhesion and reliable results while delivering a translucent green finish ideal for display models and miniatures.

Once washed for at least five minutes, parts require a brief post-cure of three minutes under UV light to lock in their mechanical properties. This process yields finished objects with a tensile strength ranging from 38-43 MPa and a hardness of 82-85 HD, ensuring they are firm, dimensionally stable, and visually appealing. The product carries part number SSX2TG-10 and is available in a convenient 1kg size.

Description

This resin delivers professional-grade results without the environmental impact of traditional solvents. Its translucent green color provides excellent contrast for detailed work, while the low volume shrinkage rate ensures that intricate geometries remain accurate from print to final object. The material is fully cured and can be disposed of as standard plastic waste after proper UV treatment, making it a responsible choice for hobbyists and professionals alike.

Features

Key Performance Highlights

• Water-washable formula allows rinsing with plain water in five minutes or more without IPA
• Compatible with all MSLA/LCD printers operating at 365-405 nm wavelengths
• Translucent green color perfect for miniatures, display models, and detailed prints
• Cured hardness of 82-85 HD combined with tensile strength of 38-43 MPa
• Low volume shrinkage rate between 2.2% and 5.5% for superior dimensional accuracy
• Rapid post-cure capability in just three minutes at 405 nm UV intensity

Technical Specifications

• Material: Hydrophilic group-modified light-curing resin
• Color: Translucent Green (#009A17)
• Resin Size: 1kg bottle
• Viscosity: 190-230 mPa·s at 25degreesC
• Density: 1.07-1.09 g/cm
• Elongation at Break: 16-22%
• Bending Modulus: 48-60 MPa
• Bending Strength: 2300-3000 MPa
• Young's Modulus: 1100-1300 MPa
• Izod Impact Strength: 133 J/m
• Cleaning Method: Water rinse for at least 5 minutes or IPA wash for 3 minutes

Printing and Curing Guidelines
To achieve the best results, shake the bottle well before use to ensure uniform consistency. The optimal print environment temperature ranges from 20-40degrees C, with a recommended printing temperature between 20-50degrees C for stable layer bonding. The first layer typically requires an exposure duration of 25-40 seconds depending on printer settings, while normal layers generally cure in just 2 to 2.5 seconds.

Post-processing is equally straightforward. After washing, place the part under a UV light source with an intensity of 25,000-30,000 µW/cm² for three minutes at temperatures between 18-30degrees C. This ensures the resin reaches its full mechanical potential before use.

What's in the Box

• Anycubic Water Wash Resin 2.0 - Translucent Green x1 (1kg)

Safety and Disposal Information
Proper disposal is critical for environmental safety. Do not drain wastewater directly into sewers to prevent groundwater contamination. Instead, allow the used cleaning water to sit in a tank until fully cured under sunlight. Once solidified, treat the residue as standard plastic waste for recycling.

Specifications

©2026 Respective owners and brand holders. This table has been carefully researched and generated by ComXpert International CC (//www.comx-computers.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	SSX2TG-10
Colour	Translucent Green (#009A17)
Resin Size	1kg
Pre-print preparation	Shake well before use
Print environment	20-40 degreesC
First layer exposure duration	25-40 s
Normal exposure duration	2-2.5 s
Print temperature	20-50 degreesC
Material	Hydrophilic group-modified light-curing resin
Wavelength	365-405 nm
Viscosity	190-230/mPa s(25degreesC)
Density	1.07-1.09/g/cm³
Hardness	82-85 HD
Tensile Strength	38-43 MPa
Elongation at Break	16-22%
Bending Modulus	48-60 MPa
Bending Strength	2300-3000 MPa
Young's Modulus	1100-1300 MPa
Izod Impact Strength	133 J/m
Volume Shrinkage Rate	2.2-5.5%
Cleaning	95% IPA
Washing duration	≥3 mins
UV Wavelength	405 nm
Curing Temperature	18-30 degreesC
UV Intensity	25000-30000 uW/cm²
Curing time	3 mins
Disposal	Post-UV-curing resin is treated as plastic waste
Cleaning	Water
Washing duration	Medium ≥5 min
UV Wavelength	405 nm
Curing Temperature	18-30 degreesC
UV Intensity	25000-30000 uW/cm²
Curing time	3 mins
Disposal	1. Do not drain wastewater into sewers to avoid contaminating groundwater.
	2. After cleaning, let the wastewater sit in the tank for a period of time.
	3. Place it under sunlight to allow the resin in the tank to fully cure.
	4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.

FAQ

Do I need isopropyl alcohol (IPA) to clean prints made with this resin?
No, the Anycubic Water Wash Resin 2.0 Translucent Green features a hydrophilic formulation designed to be rinsed clean with plain water for at least 5 minutes, eliminating the need for harsh solvents during the washing stage.

Which types of 3D printers are compatible with this resin?
This resin is optimized for MSLA and LCD resin printers that utilize UV light sources within the 365-405 nm wavelength range, making it suitable for a wide variety of consumer-grade machines.

How do I properly dispose of the used water from washing prints?
You must not drain wastewater into sewers; instead, let the wash water sit in the tank and cure under sunlight until solidified before disposing of it as standard plastic waste to prevent environmental pollution.

What are the recommended temperature conditions for printing this resin?
For consistent layer adhesion and reliable results, you should print at an ambient temperature between 20-40 degrees C, with a specific print environment range of 20-50 degreesC.

How long does the post-curing process take to lock in mechanical properties?
After washing, parts require a post-cure for 3 minutes at 405 nm UV light (with an intensity of 25,000-30,000 µW/cm² ) to achieve maximum hardness and dimensional stability.